Aem 30-4400 Digital Volt Gauge Manuel d'utilisateur télécharger pdf

ADVANCED ENGINE MANAGEMENT INC.

This product is legal in California for racing vehicles only and should never be used on public highways.

Advanced Engine Management, 2205 126

Street Unit A Hawthorne, CA. 90250, Phone: (310) 484-2322 Fax: (310) 484-0152

30-4400 BATTERY VOLTAGE GAUGE QUICK START GUIDE

DIGITAL DISPLAY GAUGE

The AEM Digital Display Gauges are designed for easy installation and usability. The 30-4400 Battery Voltage Gauge kit

comes with all the necessary components to install and use the gauge. Follow the instructions printed in this quick start

sheet to install your gauge and start using it as soon as possible. Visit the “AEM Gauges” section of the AEM electronics

forum for more information on the advanced features of this gauge. The forums can be accessed by clicking on the

“FORUMS” link on the AEM home page, www.aempower.com.

The 30-4400 Kit Contains:

(1) Battery Voltage Gauge assembly

(1) Installation Cable

(4) Butt Connector

(1) Silver Bezel

(1) White Battery Voltage Faceplate

(1) Instructions

Gauge Configuration: The gauge bezels are threaded on to the

gauge cup. Rotate the bezel in a counter-clockwise direction to

remove it from the cup. Once removed, the faceplate can be

changed and/or a different bezel can be installed.

Electrical Connection: In order to use the gauge, only the red and

black wires need to be connected. The white and blue wires do not

need to be connected. Connect the red wire to switched +12V.

Connect the black wire to a known good ground. Plug the connector

on the harness into the mating connector on the sensor. See the

connection diagram below.

Ground (Black)

Switched +12V (Red)

RS232 (Blue)

0-5V Output (White)

Figure 1. Connection Diagram

1 2

ADVANCED ENGINE MANAGEMENT INC. This product is legal in California for racing vehicles only and should never be used on public highways. Advanced

AEM Electronics Warranty Advanced Engine Management Inc. warrants to the consumer that all AEM Electronics products will be free from defects in mat

Pas de commentaire

Aem 30-4400 Digital Volt Gauge Manuel d'utilisateur