Aem 30-3003 Water Methanol Injection Inline Filter Manuel d'utilisateur télécharger pdf (Page 1)

AEM Performance Electronics

2205 W 126

Street Unit A, Hawthorne, CA 90250

Phone: (310) 484-2322 Fax: (310) 484-0152

http://www.aemelectronics.com/

Instruction Part Number: 10-3003 Rev B

Page 1

1. Install filter on the low pressure side between the tank and pump. Splice into existing line by cutting tubing

with a sharp razor blade. Install filter with arrow on housing pointing in the direction of flow.

2. Ensure removable filter bowl is tight. Prime injection system and check for leaks.

3. Check that filter does not contact any hot or moving parts.

4. Filter will protect injection system from foreign particles and small debris down to 40 microns in size.

Periodically inspect and clean the filter element for longest service life.

Important Safety Notice Regarding Methanol

AEM strongly recommends that users never exceed a 50% methanol concentration when using any

AEM Water Methanol system or component.

Instruction Manual

P/N 30-3003 Water/Methanol In

ection Filter

This product is legal in California for racing vehicles

only and should never be used on public highways.

1 2

AEM Performance Electronics 2205 W 126th Street Unit A, Hawthorne, CA 90250 Phone: (310) 484-2322 Fax: (310) 484-0152 http://www.aemelectronics.com/

Page 2 All AEM Water/Meth injection systems and components (pump, lines, fittings, filter, flow sensor, tank, and nozzles) are 100% chemically c

Pas de commentaire

Aem 30-3003 Water Methanol Injection Inline Filter Manuel d'utilisateur Page 1