Aem 30-2400 Boost Control Solenoid Kit Manuel d'utilisateur télécharger pdf

ADVANCED ENGINE MANAGEMENT INC.

This product is legal in California for racing vehicles only and should never be used on public highways.

Advanced Engine Management, 2205 126

Street Unit A Hawthorne, CA. 90250, Phone: (310) 484-2322 Fax: (310) 484-0152

BOOST CONTROL SOLENOID

AEM P/N 30-2400

The model 30-2400 Boost Control Solenoid is specially modified for use as a boost control solenoid in high boost

automotive systems. The kit includes all the necessary fittings to plumb your wastegate for either an internal or external

wastegate.

The 30-2400 Kit Contains:

1x Fast Response Solenoid

1x Mating Connector Assembly

1x 1/8” NPT Sintered Muffler

2x 1/8” NPT to 3/16” Hose Barb Adapters

Operating Voltage: 12VDC

Operating Frequency: 31hz

Duty Range: 10 to 90%

Max Pressure: 120 PSI

Electrical Connection: Polarity is unimportant. Hook

one wire to switched 12 Volts and the other to the AEM

EMS’s PW2 output or the driving devices boost control

line. NOTE: on the SRT4 EMS 30-1510 PW2 outputs +12V.

Hook up one wire to PW2 and one wire to ground.

If you are not sure please refer to your EMS instructions/pin

out sheet and verified the polarity output on PW2.

When energized, ports 1 & 2 are connected, when

de-energized, ports 2 & 3 are connected. The port

numbers are clearly noted on the solenoid body.

1 2

ADVANCED ENGINE MANAGEMENT INC. This product is legal in California for racing vehicles only and should never be used on public highways. Advanced

AEM Electronics Warranty Advanced Engine Management Inc. warrants to the consumer that all AEM Electronics products will be free from defects in

Pas de commentaire

Aem 30-2400 Boost Control Solenoid Kit Manuel d'utilisateur